Skip to content Skip to footer

IDEAS 2016: Pakistan Ordnance Factories and Česká Zbrojovka will begin talks on small arms (BREN 2?)

Radio Pakistan reports that Pakistan Ordnance Factories (POF) signed a letter-of-understanding (LoU) with Česká Zbrojovka (CZ), the maker of the CZ-806 BREN 2 assault rifle, to “intensively negotiate [the] delivery of complete technology for the production of small arms [at] POF.”

If concluded, CZ’s product(s) will see a “gradual launching” in Pakistan, initially with “light assembly” and in time, “to maximum localization of production.” Complete transfer-of-technology and technical support, including training of personnel, is expected.

From Radio Pakistan:

The 3rd LOU was signed between POF and M/s. CeskaZbrojovka, Czech Republic. According to LOU M/s. CeskaZbrojovka, Czech Republic and Pakistan Ordnance Factories declared that they will intensively negotiate a delivery of complete technology for the production of small arms to Pakistan Ordnance Factories, POF. Mutual interest refers to gradual launching of production in Pakistan, ranging from light assembly to maximum localization of production. Within this cooperation, transfer of technology as well as technical support including technical training of the personnel for Pakistan Ordnance Factories is expected.

Notes & Comments:

The LoU signed with CZ is different from the MoUs POF signed with Czechoslovak Group (CSG) and Polska Grupa Zbrojeniowa S.A (PGZ), which were final agreements.

The LoU is an intent to negotiate, potentially for the CZ-806 BREN 2, which was among the rifles evaluated for the Pakistan Army’s next-generation standard issue rifle program.

Although deployed with the Czech Army as 5.56x45mm, Pakistan was offered the 7.62x39mm variant of the BREN 2, which (until being shown at POF in March) was thought to have been available only on paper. CZ noted (p52) that a 7.62x51mm version is also under consideration.

Pakistan selecting the CZ-806 BREN 2 would not be surprising. Among the options studied, the BREN was, presumably, among the more affordable options (at least in comparison to the FN SCAR), especially if the intention was to issue the rifle to the entirety of the Pakistan Army’s regular infantry.

However, considering that it was the 7.62x39mm version that was evaluated, it is unclear if the BREN was being examined in relation to the 7.62x51mm G-3, for which the FN SCAR-H and Beretta ARX-200 were tagged as leading next-generation candidates. But if POF is seeking a production contract with CZ, it is possible that the Army has opted to shift the mainstay of its future rifle distribution to 7.62x39mm The fact that POF recently opened a production site for 7.62x39mm rounds suggests that 7.62x39mm will play a central role in the Army’s infantry doctrine. In this scenario, a 7.62x51mm rifle such as the SCAR could still be sought, but as a smaller off-the-shelf purchase (without a production element at POF).

If not the BREN, POF could be interested in CZ’s Scorpion line of submachine guns (SMG), which could be offered to the Pakistani and overseas market as a successor to the MP5. The CZ-75 line of pistols could also be an area of interest to POF. However, there have been no reports of POF seeking a SMG or pistol, much of CZ’s relevance at this point is related to the BREN.

Show CommentsClose Comments


  • by Shakeel
    Posted November 25, 2016 4:58 pm 0Likes

    Reviews for the CZ-806 Bren 2, have been positive, Not the most superior product, but certainly best value.

  • by Aamir
    Posted November 25, 2016 8:36 pm 0Likes

    Watching a few reviews on YouTube, seems like the Bren 2 is a copy of the Scar.

  • by Aamir
    Posted November 25, 2016 8:40 pm 0Likes

    Also I own a CZ 75b, it is a very good weapon. As a matter of fact the CZ 75 was the primary side arm of a lot police departments in the US. So CZ has very good pedigree as a weapons manufacturer.

  • by Bilal Khan
    Posted December 11, 2016 2:10 am 0Likes

    Everyone is basically just referring to the LoU (discussed above). Based on the LoU, POF is certainly negotiating with CZ for something, and the BREN is the only thing everyone seems to seen in the hands of the Army. But in regards to the rest, e.g. SCAR/ARX replacing the G-3… Honestly, I don’t know.

    On the other hand, I’m not convinced that Pakistan will be buying *two* full rifle platforms with local production or for mass adoption in the Army. Differing calibers aside, the BREN, ARX, and SCAR serve the same functional purpose, and each one of these platforms, design-wise, can be configured for different calibers. What’s the point of opening an entire ARX or SCAR line for 7.62 NATO when one can just work with CZ to develop a 7.62 NATO BREN? The latter route will be more cost-effective. Sure, it could take in time in terms of trialing and maturing, but can the cost of returning to a platform one is already investing in be more than buying into another – second – distinct platform?

    Also, if the armed forces are going to spend copious amounts on small arms, then why go for two similar rifle platforms? Why not one rifle design plus accessories, such as UBGL and/or reflexive sights?

  • by Shakeel
    Posted December 11, 2016 3:12 am 0Likes

    Thank you Bilal. Your response make perfect logical sense.

    I guess the difference between assault rifle (Bren 2 CZ807) & ARX 200 designated marksman rifle is literally the same thing. Also, acquiring additional add on accessories such as UBGL would give additional value added benefits on one platform.

    Also interesting read below:

Leave a comment